| Specification EA1300 EA1600 EA2000
Power Output Level 1kHz, THD N=0.1% RMS @ 8ohm stereo
300W 300W 500W 500W 750W 750W
RMS @ 4ohm stereo
450W 450W 750W 750W 1000W 1000W
RMS @ 2ohm stereo
900W 900W 1350W 1350W
RMS @ 8ohm bridge
900W 1500W 2000W
RMS @ 4ohm bridge
1800W 2200W
Phase response (1W, 20Hz-20kHz at 8ohm) ±10°
Total Harmonic Distortion (THD N) 20Hz~20kHz,Half Power ＜0.1%
Frequency Response 1W/ 8ohm
20Hz-20kHz -1dB @ 1kHz ±1dB
Slew Rate 25V/μs
Intermodulation Distoration (IMD) 60Hz:7kHz, 4:1, Half Power ＜0.03%
Channel Separation Half Power, RL=8ohm, 1kHz Vol.max., input 600ohm shunt >60dB
SN Ratio 95dB
Damping Factor 8ohm, 1f = 1kHz
300 350 400
Sensitivity (Vol.max.) Rated Power into 8ohm 0.775V/1.0V/1.44V
Input Impedance balanced/ unbalanced 20K ohm / balanced , 10K ohm /balanced
Controls Front Panel Power Switch (ON/OFF), Volume/CH
Rear Panel senstivity switch, operation mode switch, grounding switch, filiter switch
Input Connectors per channel Female &male XLR (pin 2 ,configurable for pin3 ,groung 1 )
Output Connectors
per channel 2-way binding posts or speakon connectors
LED Indicators per channel
Protect / Clip / SIGNAL / ACTIVE / BRIDGE / PARALLEL
Protection Circuit SHORT CIRCUIT PROTECT,OVER LOAD PROTECT,DC PROTECT,SOFT START, HIGH TEMPERATURE PROTECT LIMITER.
Class AB H H
Power Supply 120V,60Hz 230V, 50HZ
Cooling Two individual cooling fan controlled by temperature
Dimensions (W x H x D) W548mm×D519mm×H143mm
Weight Kg 16 19 23
|
