| Specification V1 V2 V3
Power Output Level 1kHz, THD N=0.1% RMS @ 8ohm stereo 600W 600W 800W 800W 1100W 1100W
RMS @ 4ohm stereo 900W 900W 1200W 1200W 1650W 1650W
RMS @ 2ohm stereo 800W 800W 1050W 1050W 1250W 1250W
RMS @ 8ohm bridge 1800W 2400W 3300W
RMS @ 4ohm bridge 1600W 2100W 2500W
Phase response (1W, 20Hz-20kHz at 8ohm) ±10°
Total Harmonic Distortion (THD N) 20Hz~20kHz,Half Power ＜0.1%
Frequency Response 1W/ 8ohm 20Hz-20kHz -1dB @ 1kHz ±0.5dB
Slew Rate 35V/μs
Intermodulation Distoration (IMD) 60Hz:7kHz, 4:1, Half Power ＜0.03%
Channel Separation Half Power, RL=8ohm, 1kHz Vol.max., input 600ohm shunt >70dB
SN Ratio 95dB
Damping Factor 8ohm, 1f = 1kHz 400 450 500
Sensitivity (Vol.max.) Rated Power into 8ohm 0.775V/1.0V/1.44V
Input Impedance balanced/ unbalanced 20K ohm / balanced , 10K ohm /balanced
Controls Front Panel Power Switch (ON/OFF), Volume/CH
Rear Panel senstivity switch, operation mode switch, grounding switch, filiter switch
Input Connectors per channel Female &male XLR (pin 2 ,configurable for pin3 ,groung 1 )
Output Connectors per channel 2-way binding posts or speakon connectors
LED Indicators per channel Protect / Clip / SIGNAL / ACTIVE
LCD Indicators per channel WORK MODEL， TEMPERATURE，SHORT CIRCUIT PROTECT,OVER LOAD PROTECT,DC PROTECT
Protection Circuit SHORT CIRCUIT PROTECT,OVER LOAD PROTECT,DC PROTECT,SOFT START, HIGH TEMPERATURE PROTECT LIMITER.
Class AB H H
Power Supply 220V, 50HZ
Cooling Two individual cooling fan controlled by temperature
Dimensions (W x H x D) W548mm×D519mm×H143mm
Weight Kg 16 19 23
|
