Log in


Fluid Bed Dryer

 7602, “Chamunda Nr. Ramol Cross Roads, G.I.D.C., Phase-IV, Vatva, Ahmedabad 382445, Gujarat, India - Map Directions

Fluid Bed Dryer offers a lucid solution to drying of wet granules, crystalline or coarse materials. It utilizes the principle of passing the hot air at a high velocity through the bed of the material to be dried, thus causing it to fluidize.


The blower situated on the exhaust side of the dryer operates no negative pressure principle, which creates the induced draught and sucks in the fresh air into the dryer. A stream of hot filtered air is introduced from the bottom of product container containing the wet material. This container is provided with the air distribution plate and Dutch sieve. The air stream is passed through the bed of the material and fluidizes the product particles by creating the turbulence in the product container. Due to fluidization each particle gets surrounded by hot air, which leads quick & uniform heating and drying. Filter bags provided at the top prevent escaping of particles from the machine.



  • In compliance with cGMP guidelines
  • Modular Design
  • Uniform Drying with reducing Drying time
  • Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
  • Online Sampling Device (optional)
  • Fully Automatic Operation through Programmable
  • Logic Controller (optional)
  • Product Container with Stirrer (optional)
  • Flameproof Construction (optional)

# The blower motor of higher capacity will be required in machine if
supplied with HEPA, Scrubber & ducting length above 5 meters.

Container Gross Volume Ltr. 46 71 142 280 475 650 870 1055 1350
Max. Batch Capacity (0.5 bd) kg* 0 to 15 20 to 30 40 to 60 80 to 120 160 to 200 200 to 300 300 to 400 400 to 500 500 to 600
Blower Motor HP** 7.5 7.5 10 20 25 30 40 50 50
Air Flow (CFM)± 10 % 430 706 1060 1880 2590 3235 3825 4000 4705
Steam Pressure (kg/cm2) 3.5
Steam Consumption (kg/hr) 30 50 80 140 216 250 288 344 384
Electric Heater (kW) 18 20 36 60 N.A. N.A. N.A. N.A. N.A.
Compressed Air Pressure (bar) 8
Drying Temp (°C) 35-80
Electrical Supply** 415 V±10%, AC, 3 Ø, 50 Hz


Offer Reviews

Add new review

There are no reviews at the moment


Tradezone.com has been putting suppliers and buyers together for over 65 years.  This Suppliers Directory focuses on promoting International Trade.  You are welcome to list your company and products here and we will do our best to provide great internet exposure for you.


Copyright © 2020 Tradezone.com. All Rights Reserved