Sort By:   GridListGallery

Trade Leads in Industrial Machinery, Equipment & Supplies

 : 1 |   : 0

Introduction and performance:  TSP-40 man portable drilling rig is the products absorb the advantages both from domestic and foreign throughout repeated tests. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the ...

   0%

Aug 12, 2019, 9:14:17

 : 1 |   : 0

Introduction and performance:  TSP-40 man portable drilling rig is the products absorb the advantages both from domestic and foreign throughout repeated tests. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the ...

   0%

Aug 12, 2019, 9:11:37

 : 1 |   : 0

Introduction and performance:  TSP-40 man portable drilling rig is the products absorb the advantages both from domestic and foreign throughout repeated tests. Strict testing has been passed in the worst terrain and mountain areas. It can be used in mountain, hill, Plain, Forest, Farmland for petroleum prospecting. All of operation handles and indicators were installed on operation platform. The rig was installed with safety, caution and environmental protection symbols, and it meets with the ...

   0%

Aug 12, 2019, 9:03:53

 : 1 |   : 0

Application & specification 1. Design rating: ASME B16.34 2. Face to face: ASME B 16.10 3. Flanged ends: ASME B16.5 4. Inspection & testing: API 598 Main Parts and Materials Part Name: Material Body/Bonnet: WCB/CF8/CF8M Ball/Stem: stainless steel 304/ 304/316 Seat: CF8/CF8M Stud/Screw: B7/304 Washer: 1020/304 Handle: WCB Retaining Ring: 65Mn/304 Orientation patch: 1020/304 Gland: WCB/CF8 Gasket/Packing/Thrust Gasket: PTFE Nut:...

   0%

Aug 9, 2019, 7:31:07

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 6:10:56

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 6:08:24

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 3:54:13

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 2:58:23

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 2:52:04

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 2:10:50

 : 1 |   : 0

Heat exchange area and pressure can be designed and customized according to customers' requirements. Heat exchanger, also called heat transfer machine, is the equipment that can transfer certain heat from the thermal fluid to the cold fluid. It is the essential equipment to achieve the heat exchange and transfer during the production process. The type of heat exchanger we can produce includes: fixed tube-plate exchanger, double- tube plate heat exchanger, tubular heat exchanger,...

   0%

Aug 9, 2019, 2:07:47

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 9, 2019, 2:04:03

 : 1 |   : 0

ASTM A335 P9 Alloy Steel Pipe is then finished to dimensional and wall thickness specifications in sizes from 1/8 inch to 26 inch OD.P9 Pipe has following application of Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service. https://www.rexaltubes.net/astm-a335-asme-sa335-pipetube/pipetube-type-sa335-grade-p9/

   0%

Aug 8, 2019, 13:59:29

 : 0 |   : 0

The briquetting machine is widely used for granulating and pressing balls in materials like aluminum chips, activated carbon, alumina, bauxite, caustic soda, charcoal, clay, coke, coal, cryolite, fertilizer, limestone, pigment, urea, potassium, etc. The charcoal ball press machine can press materials like bamboo charcoal powder, carbon powder, coke powder, shisha charcoal, ect. The charcoal powder ball press machine is also used to reduce dust, control unit weight, recycle and improve...

   0%

Aug 8, 2019, 12:12:15

 : 5 |   : 0

Tower equipment is one of the most important equipment in the production of fine chemical industry, petrochemical industry and oil refining. Tower equipment can make two-phase contact closely to achieve mass transfer and heat transfer between between gas (or vapor)- liquid or liquid-liquid. We factory has rich experience in design, manufacture and installation of various large and medium-sized tower such as absorption, distillation, desorption and extraction. Material: carbon...

   0%

Aug 8, 2019, 8:32:58

 : 5 |   : 0

Reactors: stainless steel reactor, hastelloy reactor, titanium reactor, high pressure reactors Heat exchangers: Tubular heat exchanger, U-tube heat exchanger Absorber columns

   0%

Aug 8, 2019, 7:49:11

 : 1 |   : 0

Location: China Business Type: Manufacturer, Exporter Brands: Hengmei Terms of payment and delivery: 30% deposit and 70% after copy shippment documents Minimum order quantity: 1 set Price: Consultation Packing details: Pallet Delivery time: One month Payment method: Consultation Port of loading: Ningbo, China

   0%

Aug 8, 2019, 4:29:00

 : 1 |   : 0

Terms of payment and delivery: 30% deposit and 70% after copy shippment documents Minimum order quantity: 1 set Price: Consultation Packing details: Pallet Delivery time: One month Payment method: Consultation Port of loading: Ningbo, China

   0%

Aug 8, 2019, 4:26:42

 : 0 |   : 0

Jaw crusher is the traditional crushing equipment with many models and large output. PE jaw crusher is mainly used for primary crushing of various ores and undisturbed materials, also used for both coarse and fine crushing. There are many models of PE jaw crushers, among which the most popular models are PE-750×1060, PE-600×900, PE-150×250, etc. In order to meet the strict requirements of customers, the crusher has been extended to the PEX jaw crusher under the constant innovation of en...

   0%

Aug 8, 2019, 1:39:51

 : 1 |   : 0

Attributes Part Type: Hydraulic Product Media: Glass Fiber Height: 16.020(406.908mm) OD Top: 4.370(110.998mm) ID Top: 2.441(62.0014mm) OD Bottom: 4.370(110.998mm) ID Bottom: 0.728(18.4912mm) Collapse Pressure (PSI): 145 Operating Temp Min (F): -13 Operating Temp Max (F): 248 Flow Direction: Outside-In Gasket Material: Viton Fluid Type: HH / HL / HM / HV / HFA / HFB / HFC Packaged Dimensions Gross Length 121mm Gross Width 121mm Gross Height 417mm Gross W...

   0%

Aug 7, 2019, 8:30:01

 : 1 |   : 0

Attributes Part Type: Hydraulic Product Media: Glass Fiber Height: 8.140(206.756mm) OD Top: 3.799(96.4946mm) ID Top: 1.693(43.0022mm) OD Bottom: 3.799(96.4946mm) Collapse Pressure (PSI): 145 Operating Temp Min (F): -13 Operating Temp Max (F): 248 Capacity (GR): 65 Filter Area (SQ IN): 664 Flow Direction: Outside-In Gasket Material: Viton Fluid Type: HH / HL / HM / HV / HFA / HFB / HFC Packaged Dimensions Gross Length 106mm Gross Width 106mm Gross H...

   0%

Aug 7, 2019, 8:28:29

 : 1 |   : 0

Attributes Part Type: Hydraulic Product Media: Glass Fiber Height: 8.220(208.788mm) OD Top: 1.772(45.0088mm) ID Top: 1.004(25.5016mm) OD Bottom: 1.772(45.0088mm) Collapse Pressure (PSI): 305 Operating Temp Min (F): -13 Operating Temp Max (F): 248 Capacity (GR): 15 Filter Area (SQ IN): 155 Flow Direction: Outside-In Gasket Material: Viton Fluid Type: HH / HL / HM / HV / HFA / HFB / HFC Packaged Dimensions Gross Length 55mm Gross Width 55mm Gross Height 219mm Gross...

   0%

Aug 7, 2019, 8:25:29

 : 1 |   : 0

Attributes Part Type: Hydraulic Product Media: Glass Fiber Height: 25.660(651.764mm) OD Top: 3.071(78.0034mm) ID Top: 1.634(41.5036mm) OD Bottom: 3.071(78.0034mm) Collapse Pressure (PSI): 145 Operating Temp Min (F): -13 Operating Temp Max (F): 248 Capacity (GR): 146 Filter Area (SQ IN): 1560 Flow Direction: Outside-In Gasket Material: Viton Fluid Type: HH / HL / HM / HV / HFA / HFB / HFC Packaged Dimensions Gross Length 88mm Gross Width 88mm Gross H...

   0%

Aug 7, 2019, 8:23:02

 : 1 |   : 0

Attributes Part Type: Hydraulic Product Media: Glass Fiber Height: 8.220(208.788mm) OD Top: 1.772(45.0088mm) ID Top: 1.004(25.5016mm) OD Bottom: 1.772(45.0088mm) Collapse Pressure (PSI): 305 Operating Temp Min (F): -13 Operating Temp Max (F): 248 Capacity (GR): 15 Filter Area (SQ IN): 155 Flow Direction: Outside-In Gasket Material: Viton Fluid Type: HH / HL / HM / HV / HFA / HFB / HFC Packaged Dimensions Gross Length 55mm Gross Width 55mm Gross Height 219mm Gross...

   0%

Aug 7, 2019, 8:11:32

 : 5 |   : 0

Below is specification of LS600*600 Automatic aluminium complete production line for lay in ceiling ,clip in ceiling. 1.The important components: No. Component name Quantity specification 1 Decoiler 1 set a.Hydraulic pressi b.loading capacity :5ton c.speed:adjustable d.Inner diameter:400m-500m e.largest outer diameter:1500m f.Weight:1500kg g.measurement:(Length)1.7m*(Width)1m*(Height)1.5m 2 Straightening machine 2 sets a.Material width can be less then...

   0%

Aug 7, 2019, 7:35:53

 : 1 |   : 0

About Project CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:05:37

 : 1 |   : 0

About Project MATERIAL:C11000 CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:04:57

 : 1 |   : 0

About Project: MATERIAL: PC IR2200 COLOR: RAL7015 SIZE: 4.5 * 2.5 * 3.5 Description Materials used PC IR2200 RAL7015

   0%

Aug 6, 2019, 14:04:18

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:03:32

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:02:56

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:02:21

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 14:00:54

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used POM

   0%

Aug 6, 2019, 13:59:50

 : 1 |   : 0

About Project: MATERIAL: AL6061 CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 13:59:06

 : 1 |   : 0

About Project: CNC turning up to ø65mm CNC milling up to 1.5m Boring and threading Grinding and lapping Aluminum/zinc die-casting Surface and heat treatments/coating/anodizing Description: Materials used Aluminum: 5052 / 6061 / 6082 Brass: C3604 Stainless steel: 1.4305 / 1.4301 / 1.4404 Steel:1.0715 / 1.1141 / 1045 / 1144

   0%

Aug 6, 2019, 13:58:37

 : 1 |   : 0

Model: YWF4/6-450 Terms of payment and delivery: FOB/CIF/C&F Minimum order quantity: 50 PCS Price: Consultation Packing details: CARTON/WOOD PALLET Delivery time: 1 MONTH AFTER THE ORDER

   0%

Aug 6, 2019, 4:49:15

 : 1 |   : 0

Model: YWL4E/D-300QD Terms of payment and delivery: FOB/CIF/C&F Minimum order quantity: 50 PCS Price: Consultation Packing details: CARTON/WOOD PALLET

   0%

Aug 6, 2019, 4:47:37

 : 1 |   : 0

Packing details: CARTON/WOOD PALLET Delivery time: 1 MONTH AFTER THE ORDER Payment method: T/T

   0%

Aug 6, 2019, 4:46:19

 : 1 |   : 0

Standard Design: API609-83 Flange dimension: ASME B16.5 Face to face: ASME B16.10-1992 Pressure test: API 598-82 Parts Name Parts Material Body WCB/304/316/CF8M Disc WCB/304/316/CF8M Stem 316/2Cr13/1Cr18Ni9Ti Sealing 316/PTFE Packing Graphite/PTFE Main External and Connecting Dimensions API 815W/L DN L L1 H H0 D D1 D2 M Z-d Weight(kg) 2" 50 43 108 110...

   0%

Aug 5, 2019, 3:42:15

 : 4 |   : 0

Our advantages: 1) Easy operation on the electrical control panel. 2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 3) High speed can be controlled as required according to the Pneumatic drive and motor drive double combination. 4) Steel frame of perforation machine to make it with strong body to working for the long time. 5) High precision of automatic control system to make it suitable for the high quality perforation.

   0%

Aug 5, 2019, 2:03:24