Featured in Others

Sort By:   GridListGallery

Trade Leads in Others

 : 1 |   : 0

We are factory for Casting Parts in Ningbo, China. Just send us your mechanical property request and drawings or samples, we can process it to you. Any thing to be sourcing, just let us know, we are here work for you.

   0%

Mar 23, 2018, 2:45:18

 : 3 |   : 2

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines.  Highlights:  1. Our products have good rigidity. 2. 400T upsetting force can meet all kinds of requirements of drill pipe, oil pipe. 3. 256mm cavity can produce all products of oil pipe, drill pipe, drill collar. ...

   0%

Dec 25, 2018, 9:03:05

 : 1 |   : 1

WIPEX Household Wipes (cleaning cloth and kitchen wipes) are durable ,high strength and high water absorbent – absorbing 6times its weight in liquid – and they are perfect for soaking up big spills fast or for cleaning with a sanitizing agent.

   0%

Dec 20, 2018, 8:23:26

 : 0 |   : 0

Low-speed centrifuge operating environment must have certain requirements, first of all, the temperature should not be too bad, and secondly, the station should be stable, and finally the voltage! Especially in the space that has been in action, such as some cars, we often have a blood donation car. This is also a car that needs a centrifuge. At this time, it is said: The engine room air conditioner crankcase is evacuated and refueled. First close the liquid supply valve and the suction...

   0%

Dec 17, 2018, 9:28:54

 : 0 |   : 0

High Speed Microcentrifuges are named after high speeds, and their performance and construction are similar to those of conventional centrifuges. Because of the high speed, the requirements of the rotor are higher than the ordinary requirements, especially in the material, using titanium alloy and aluminum alloy. The same centrifuge tube is also made of a specific material and is made of polyethylene hard plastic. Such centrifuges are often used to collect microorganisms, cell debris, cells,...

   0%

Dec 17, 2018, 9:27:55

 : 0 |   : 0

Buying a Pharmaceutical centrifuge to find which one, this first customer thinks of the first question, why don’t we change our mind today? What are the old centrifuges? After all, the centrifuge is a relatively expensive device, so there is no special reason, don’t be easy Try a new brand and be the first to eat crabs! Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. is referred to as “Lu Xiangyi”, not only the old centrifuge products of Shanghai, but also the old brand of the Chinese centri...

   0%

Dec 17, 2018, 9:26:57

 : 0 |   : 0

Large capacity centrifuge Main technical performance 1. Microcomputer control, DC brushless motor drive, stable operation, low noise and high speed precision. 2. touch panel, programmable operation, host operating parameters can be set according to requirements and automatically stored. 3. digital screen display, user-friendly interface, easy to operate. 4. real-time rpm / RCF reading conversion and setting, convenient and fast. 5. equipped with electronic door locks, with a variety of...

   0%

Dec 17, 2018, 9:24:44

 : 5 |   : 0

APPLICATIONS& TEST PURPOSE: The machine is used to test bending strength of handle, under specify load on handle slowly, check the fastness of connection between two parts. DESIGN STANDARD: BS EN 12983-1 STANDARD PARAMETERS: 1. Servo motor actuator generate a maximum vertical force of 250N 2. A 300N force sensor was used to measure and control the force apply. 3. Load apply gradually without shock , to the handle until the load is supported or record the peak force when the fixing...

   0%

Dec 7, 2018, 4:31:14

 : 3 |   : 0

APPLICATIONS& TEST PURPOSE: The machine is used to perform torque strength of handle; the distortion at each direct cannot over 10 degree , also not affect the function under normal use condition. DESIGN STANDARD: BS EN12983-1 STANDARD PARAMETERS: 1. A lever, 1 m long of weight 1 Kg ± 0.1 Kg including the attachment and the pointer, capable of being affixed to the handle through clamping fixture.(Resin epoxy provide for the molding of handle shape in order to affixed the handle in such ...

   0%

Dec 7, 2018, 4:29:04

 : 4 |   : 0

Product introduction: Seat face and back of the machine to load the module must shape, weight on the horizontal seat with a certain value, the frequency of repeated loading, test bench strength, durability function Technical parameters: power drive height can be adjusted to suit different chairs 500-1200 mm the number of tests 0 ~ 999999 times can be set arbitrarily test speed adjustable 0~ 40 /min power driver adjustable the seat surface load capacity 5~200kg back loading...

   0%

Dec 7, 2018, 4:27:07

 : 5 |   : 0

Cornell Mattress Tester Factory GENERL SPECIFICATIONS Estimated Packaging Dimensions: (W*D*H) 3000*1600*2000mm Power supply source: 3-PH, 380V±10%, 50/60Hz Estimated Gross Weight: 1300kg HS Code: 9024800000 THREE FUNCTIONS 1) DURABILITY TEST STANDARD FEATURES Hexagonal Wood Barrel (ASTM F 1566) 109kg, length 915±75 mm Cylinder wood barrel (EN1957) 140kg, length 1000mm Maximum size of mattress 2200m×2000m×400mm Test speed 0-20 r/min Control method PL...

   0%

Dec 7, 2018, 4:21:33

 : 1 |   : 0

pecifications 1.Mattress Fatigue Tester is used to simulate human motion to assess the durability of the mattress. 2.OEM 1.The usage Mattress Fatigue Tester HD-F763 Using a horizontal hexagonal wooden drum roll or cylinder (both ends of the diameter of 250 mm, the middle part of the 300 mm, rolling back and forth on the mattress , simulate human motion to assess the durability of the mattress. 2.Function and features: Mattress Fatigue Tester HD- Weight of hexagonal wood...

   0%

Dec 7, 2018, 4:13:08

 : 3 |   : 0

Equipment Description Test rig for rotation testing on seating furniture according to EN 1335, EN14073-2, DIN 38878 and BIFMA X5.1, load controlled with loading pad. The pneumatic test axis operates from PLC. GENERL SPECIFICATIONS Machine Dimensions: (W x D x H) 1680*890*1840mm Power supply source: single-phase, AC220V±10%, 50/60Hz (can be appointed) Gross Weight: 400kg STANDARD FEATURES Framework 1 framework with traverse member and base plat 1200mm ×1200 mm , 12mm thick, g...

   0%

Dec 2, 2018, 9:17:08

 : 0 |   : 0

Refrigerated High Speed Centrifuge is suitable for the qualitative analysis of serum, plasma and urea in medical products, bloodstains, clinical trials and biochemical laboratories. Floor Standing Refrigerated High Speed Centrifuge separations technology is a new technology developed based on the state of particles in a practical centrifuge. Refrigerated high-speed centrifuge notes: 1. The body should always be in a horizontal position, the voltage of the external power supply system should...

   0%

Nov 28, 2018, 8:57:36

 : 0 |   : 0

Low-speed centrifuge is a common model in the laboratory. The speed of the low speed centrifuge is lower than 10,000 rpm / min. The total volume of the centrifuge can reach 3000 ml. Low speed centrifuge uses: First, add the centrifuged tubes to the substances to be separated, insert them into the rotor holes, and add the materials to each centrifuge tube to be basically equal. Close the cover, connect the power supply, turn on the switch, turn on the power indicator, and then select the time...

   0%

Nov 28, 2018, 8:55:37

 : 0 |   : 0

Pharmaceutical centrifuges have a wide range of applications in the pharmaceutical industry. Centrifugal processes use the powerful centrifugal force generated by the high-speed rotation of the centrifuge rotor to accelerate the sedimentation rate of particles in the liquid, separating the sedimentation coefficients and buoyancy-density materials in the sample. How to use a pharmaceutical centrifuge (1) Before use, first check whether the mechanical parts are in good...

   0%

Nov 28, 2018, 8:54:35

 : 0 |   : 0

large capacity centrifuge brushless inverter motor drive, microcomputer control, touch panel, programmable operation. With rotor identification function, it adopts food grade silicone rubber integral sealing ring, which is GMP certified. The large-capacity centrifugal chamber, space-saving design, and rich rotor specifications enable a multi-purpose machine. Products: Ultracentrifuge Centrifuge, Cell Washing Centrifuge, High Capacity Centrifuge, Large Volume Centrifuge, microcentrifuge, Large...

   0%

Nov 28, 2018, 8:52:28

 : 0 |   : 0

Cyto Centrifuge and Cytology centrifuge widely used in immune hematology laboratories, for erythrocyte serological experiments, antigens, antibodies and the determination of the results of the Coombs test, etc., is a hospital blood bank at all levels, the experiment Rooms, blood stations, medical schools and medical research institutions essential equipment. Cyto Centrifuge adopts microcomputer control, touch panel and DC brushless motor for direct drive, and the speed adopts PWM speed...

   0%

Nov 28, 2018, 8:45:59

 : 3 |   : 0

BT30 Plastic Tool Holder Fork Finger Clips for CNC Machines This tool change fork is the BT30 tool holder clips. It works with ATC tool magazine for clamping BT30 toolholders. It is widely used on cnc router machines like Laguna Smart Shop 2 with liquid cooling ATC, and cnc milling machine tool magazine like SUN. BT30 Tool Holder Fork Specifications: 1. Made in China, famous brand 2. Imported POM plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: ...

   0%

Nov 27, 2018, 8:13:33

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Nov 19, 2018, 9:29:53

 : 1 |   : 0

Suitable for metal, semi-conductor, oxidizing, and organic film, OLED, PLED, Solar, and other applications Evaporator would be integrated into either the floor or side wall of the glove box Available in many configurations and work station sizes Evaporator pressure limit: 6 x 10-5 Pa Evaporator pumping time: ≤40 minutes (from atmospheric pressure to 8 x 10-4 Pa) Maximum substrate size: 120x120mm Lifting range: 50mm Rotating speed: 5-30rpm; continuously adjustable Maximum substrate t...

   0%

Nov 2, 2018, 2:38:52

 : 1 |   : 0

Bubble forming machine First and second sealing machine High temperature vacuum dehydroxylation furnace Ceramic sealing furnace Pumping and refilling station Plasma sealing machine Mercury and pill injection machine Electrode positioning Outer tube sealing machine Dust filtering unit available

   0%

Nov 1, 2018, 2:57:27

 : 2 |   : 0

Carbide CNC Wood Lathe Knifes for Woodturning CNC Lather Machine This CNC wood lathe knife is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, reduces the tool changing times greatly during one day working. This carbide lathe knife eliminates the need for frequent sharpening which is very common in lathe turning woodworking. Improved the productivity, and reduce the production cost. The replaceable carbide cutter woodturning blade that address fatigue,...

   0%

Nov 1, 2018, 2:43:43

 : 2 |   : 0

Ballnose big long foam mill bits for eps poly foam cutting Thes long router bits are custom made cutters for big fast foam block deep CNC milling. Widely used used with form mould making cnc router for cutting polystyrene foam, EPS foam, EVA foam, Styrofoam, etc. Long Foam Mill Bits Features: 1, High Speed Steel (HSS) hardness: HRC 61-64.5° 2, Sharp spiral blade for clear smooth finishing 3, Extended Reach for deep carving and milling 4, Foam router cutter size could be ...

   0%

Nov 1, 2018, 2:40:57

 : 2 |   : 0

ISO30 Plastic Tool Finger Forks for HSD Auto Tool Changer CNC Routers ISO30 plastic tool finger also called ISO30 tool holder finger, ISO30 tool cradle, ISO30 tool holder fork, ISO30 tool grippers, ISO30 tool clips, ISO30 replacement holder. These replacement tool holder fingers are plastic forks for iso30 tool holders, the plastic clips to clamp ISO30 DIN 69871tool holders ,widely used in Italy HSD ATC and hiteco iso30 tool changer for woodworking ATC CNC routers and others. The plastic...

   0%

Nov 1, 2018, 2:37:00

 : 4 |   : 0

HSK63F cnc tool finger forks for HSK 63F tool holder clamping HSK toolholder gripper also called HSK toolholder fork, HSK tool clips, HSK cradle, HSK plastic tool holder, HSK tool holder finger, HSK tool forks etc. HSK 63F tool finger forks are widely used on HSK 63F ATC toolchangers CNC router centers. These tool changer grippers are used on all Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood HSK63F tool holders and other Chinese ATC cnc routers. They are exact...

   0%

Nov 1, 2018, 2:32:01

 : 1 |   : 0

Easy access to the glove box when using an external purification system Manual or PLC controlled 110V/50Hz or 220V/50Hz Working gas: Nitrogen, Argon, Helium Regeneration Gas: Working gas mixed with Hydrogen (5-10%) Available in multiple sizes

   0%

Oct 31, 2018, 3:27:37

 : 1 |   : 0

Solvent drying and purification by removing moisture, oxygen, etc Low purity grade industrial solvents can be purified into high purity grade The following solvents can be purified individually or together: Hydrocarbon compounds such as: Benzene, Ethane, Chlorine, Ethylene Dichloride; Dipolar, non-protonic solvents such as: Acetonitrile, Dimethyl Amide, Nitro Methane; Alcoholates such as: Methane, Ehtanol, Butanol, Ethers, Esters, Amines, Carbonate and their derivatives For more...

   0%

Oct 29, 2018, 3:40:08

 : 1 |   : 0

Large capacity oven is PLC controlled, integrated with glove box Fully automated transfer between oven, glove box, and discharge chambers Cooling system integrated into glove box Automatically transfers between Injecting, Sealing, and Standby processes High volume throughput Best for large batches of similar products

   0%

Oct 26, 2018, 4:53:34

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:58:00

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:57:09

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:56:51

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:55:32

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:47:19

 : 0 |   : 0

pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail pro555 detail

   0%

Oct 26, 2018, 3:46:25

 : 0 |   : 0

pro500 detail

   0%

Oct 26, 2018, 3:43:19

 : 0 |   : 0

pro200 detail http://fdj.com

   0%

Oct 26, 2018, 2:45:22

 : 0 |   : 0

pro100 detail

   0%

Oct 25, 2018, 10:29:27

 : 2 |   : 0

S&A small water chiller CWFL-800, specially designed for cooling 800W fiber laser, has superior & efficient cooling performance. It is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A chiller), a professional Chinese water chiller manufacturer with 16-year experience. Featuring the cooling capacity of 3000W and the temperature stability of±0.5℃, S&A water chiller CWFL-800 is loaded with environmentally friendly refrigerant R-410a, which helps better protect the en...

   0%

Oct 25, 2018, 8:21:11

 : 2 |   : 0

S&A water chiller machine CWFL-500, specially designed for cooling 500W fiber laser, is a cooling device with superior performance. It is produced by Guangzhou Teyu Electromechanical Co., Ltd (also known as S&A chiller), a professional Chinese water chiller manufacturer with 16-year experience. S&A chiller CWFL-500 features the cooling capacity of 1800W and the temperature control accuracy of±0.3℃. With the dual temperature control system (low temperature control system & high temperature c...

   0%

Oct 25, 2018, 8:18:27