All Trade Leads for: Walthysales

Photo Title
Micro works

As a company focusing on micro works, we are experienced of all kinds of material and requirements, widely used for all kinds of industries, are most of these parts are key components of the final products, their precision and quality are critical to your products performance. Capacity: Any material Less than 1mm thickness( could be several mm for glass or quartz) Cutting, drilling, milling, scribing, etching All these works requires features from 10micron to 1000micron,...

Apr 1, 2018, 1:43:07
Custom patterned ITO glass circuits

Complete solution of Custom designed ITO (Ag, Au or other conductive material) coated on glass or PET film  The process is developed five years ago for touch panel industry, which now is successfully replaced the wet etching process. And with long time developing and higher requirements from mobile phone industry, this process is completed and used in many other applications, mainly for developing or manufacturing sensor or circuits for OLED, medical, solar cell, consumer...

Apr 1, 2018, 1:33:09
Polyimide cutting and drilling

Polyimide(PI) cutting and drilling Min holes size 10um Drilling or cutting without any thermal effect Fast drilling process of high density micro holes

Apr 1, 2018, 1:27:18
Selective Etching

Selective etching is a process that removing required layer and no hurt to any other layer, usually the removed layer should be at the top side, but in some situation, we could also remove the inside layer We could do any pattern quickly, no mask required and chemical polluation to the product,normally the min line width and pitch could be 20~30um, in some material we could achieve less than 10um The layer thcikness could be 10nm~10um And we recently succeed in doulbe side etching of different...

Apr 1, 2018, 1:24:23
Micro drilling

* Material: any material, including all kinds of metal, alloys, and non metal material, especially hard and brittle material such as silicon, glass, sapphire, and ceramics, as well as flexible material such as PET film, flexible PCB, all kinds of plastics. * Material thickness: 0~2mm * Min pattern size: 0.01mm(depends on thickness and shape) * Could be any shapes: circles, triangle, retangle, hexagon, polygon or any shape in CAD  * Tolerance: 5~20um depends on dimension

Apr 1, 2018, 1:18:58
Laser fine cutting

* Material: any material, including all kinds of metal, alloys, and non metal material, especially hard and brittle material such as silicon, glass, sapphire, and ceramics, as well as flexible material such as PET film, flexible PCB, all kinds of plastics. * Material thickness: 0~2mm * Min pattern size: 0.01mm(depends on thickness and shape) * Could be any shapes: circles, triangle, retangle, hexagon, polygon or any shape in CAD * Tolerance: 5~20um depends on dimension

Apr 1, 2018, 1:15:43
Customized marking

High quality customized marking with fiber lasers, UV and ultra-fast lasers, apply to all kinds of mateiral including metals, ceramics, glass, silicon, ploymers, plastics

Apr 1, 2018, 1:10:44
Ceramics drilling and cutting

Ceramics: Alumina, Aluminum nitride, Zirconia Thickness: 0.1~2mm Min feature size: 0.01mm Could be any shapes: circles, triangle, retangle, hexagon, polygon or any shape in CAD Tolerance: 5~20um depends on dimension

Apr 1, 2018, 1:00:26